With the new iCharger DX6, the renowned manufacturer Junsi has launched a DUO charger in compact format.
The new DX6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite the small dimensions of 92 x 112 x 40 mm, no compromises have been made in terms of performance and ease of use. The newly developed rotary wheel has a very good pressure point and facilitates operation enormously.
The...
mehr anzeigen
weniger anzeigen
With the new iCharger DX6, the renowned manufacturer Junsi has launched a DUO charger in compact format.
The new DX6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite the small dimensions of 92 x 112 x 40 mm, no compromises have been made in terms of performance and ease of use. The newly developed rotary wheel has a very good pressure point and facilitates operation enormously.
The technical data is impressive, 1500W charging power (from >25V), 1-6s LiXx cells and up to 32Amp charging current are also sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged
The discharge power is 60Watt total (40W per output if only one output is used), but can be increased up to 1600W by external load (discharge resistor). Of course, the iCharger DX6 is also capable of regenerative charging. For example, the battery capacity of a full flight battery is fed back into the supply battery.
The balancer current of 4 amps total (2A per output) always ensures perfectly balanced cell voltages.
A USB-C PD port for charging smartphones etc (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also installed. The micro SD slot can be used to log the data, but also for future updates
Also integrated is a servo tester, please note that an external power supply is necessary!
The menu navigation is almost identical to the known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.4" IPS LCD display ensures good readability even in low light.
A manual in English is included with the charger in the form of a CD, the German version can be downloaded from us.
All Junsi chargers of the X and DUO series are developed and approved for use in model making. An industrial use is not intended and therefore not allowed! All Junsi chargers may only be operated on power supplies developed for model making! No AGM batteries may be charged in the PB program!
Technical data:
- Charge current adjustable per output: 0.1-32A
- Charge current adjustable in synchronous mode: 0.1-50A
- Max. Number of NiCd/NiMH batteries: 1-15
- Charging Power Max Syncron: 1500W
- Max. Power: 1500W
- External High Current Discharge Synchronous: 1600W
- Max. Voltage Lead Acid Batteries: 24V
- Balancer Equalizing Current per Output: 2A
- Discharge Current Adjustable at Reverse: 32A
- Discharge Power per Output: 40W
- Balancer Equalizing Current Synchronous Mode: 4A
- Max. Charge current: 50A
- Max.number of LiPo cells: 6
- Max.number of LiHv cells: 6
- Max
. discharge power: 60W- Discharge power: 60W
- Discharge power Max. in synchronous mode: 60W
- Input current limit: 65A
- Input voltage: 9-34VDC
- External high current discharge Asynchronous: 900W
- Charge power Max. at one output: 900W
- Length (mm): 92
- Micro SD card slot: Yes
- Power supply integrated: No
- Plug type charging output: XT60
- Plug type input: XT90