Castle 2028 1Y Sensored Brushless Motor - 800Kv
FEATURES:
Minimum input voltage: 3S
Maximum input voltage: 12S
Sensor Capable: Yes
Running modes include Sensored and an ULTRA-EFFICIENT Sensorless mode.
High-strength, high-temperature neodymium sintered magnets combined with a high-strength Kevlar jacket ensure that rotor integrity is not compromised in harsh running conditions.
oversized NMB bearings and a...
mehr anzeigen
weniger anzeigen
Castle 2028 1Y Sensored Brushless Motor - 800Kv
FEATURES:
- Minimum input voltage: 3S
- Maximum input voltage: 12S
- Sensor Capable: Yes
- Running modes include Sensored and an ULTRA-EFFICIENT Sensorless mode.
- High-strength, high-temperature neodymium sintered magnets combined with a high-strength Kevlar jacket ensure that rotor integrity is not compromised in harsh running conditions.
- oversized NMB bearings and a vibration damping system ensure the longest possible bearing life.
- Our proprietary winding techniques allow us to produce a stator assembly that has the lowest possible resistance, resulting in a cooler running motor.
- Dual sensor ports to ensure optimal installation in your large vehicle.
- Updated modern and sleek design; looks as cool as it performs.
The Castle 2028 Extreme 800KV motor now has an IMPROVED 4-POLUTE 12-SLOT design that features exceptional EFFICIENCY and generates LESS HEAT. If you need BIG POWER for BIG DRIVES, the new BRUSHLESS SENSORED 2028-800KV motor will undoubtedly stand up to the heavy throttle and extended use of 1/5 scale vehicles like the Losi 5IVE-T, 5IVE-B or DBXL -E encounter. It is the perfect upgrade for any 1/5 scale RC hobby vehicle (including gas-to-electric conversions) weighing up to 30 lbs for 2WD and 25 lbs for 4WD. The 2028 Extreme can easily run in the 10 hp range*
Efficiency is not enough without a rugged and reliable design. RC enthusiasts love to push their equipment to the limits. Castle engineers know this and have spared no expense to create a design that can withstand the harsh conditions the RC community faces, resulting in a cooler running motor. A cooler running motor has a longer life. The design of our motor required careful selection of components; each verified by internal testing to ensure the HIGHEST EFFICIENCY. In the end, the result is an engine with unmatched quality, performance and reliability. We wouldn't put our name on anything less.
Specifications:
- Input voltage range: 12S MAX
- Kv: 800
- max. Speed: 45,000
- Size: Length: 112.7 mm
- Diameter: 56.3 mm
- Weight (with cables): 1.25 kg
- Shaft size: Length: 30 mm
- Diameter: 8mm
- Mounting hole specifications: 4 mm at 30 mm
- Fan: Available but not included.
- Connectors: 8.0 mm connector, 250 mm sensor cable.
- Items required for operation: Compatible electronic speed controller (ESC)
- Product usage notes: monitor motor temperatures closely; Overheating a motor will cause permanent damage to the magnets. never exceed 180 ° F on the motor or ESC.
- Application Guidelines: The 2028-800KV is a waterproof design. The sensor board is coated with a conformal silicone coating to protect the sensors from moisture. The sensor connectors are not waterproof; water may cause loss of signal, which may result in loss of sensor capability. We recommend applying dielectric grease to the outside of the sensor cable connectors after installing the cable. Routine maintenance is recommended after running in wet conditions. Please refer to this document for operation and maintenance of motors in wet environments.
- Recommended controllers: Mamba XL X
- Mamba Monster X 8S (requires changing balls to 6.5 mm)
- max. Recommended vehicle weight: 4WD vehicles weighing less than 11 kg
.- 2WD vehicles weighing less than 13.6 kg
Technical notes:
Running modes: Sensorless and Sensored