Suitable for This set of tires fits front and rear - All 1/8 Buggy and GT - Rally models with 17mm hexagon wheel hubs - Absima - Stoke - Arrma - Typhon - Arrma - Infraction - Arrma - Limitless - Associated - RC8 - Associated - DB8 - Carson - Virus - Carson - Specter - Hobao - Hyper VS - Losi - 8ight - Mugen - MBX Series - Mugen - MGT Series - Sworkz - S35-GT - Team Corally - Python XP - X-Ray - XB-8 - X-Ray - GT8 - .. Please check our "TIRE-WHEEL CAR CHART" to see if this...
mehr anzeigen
weniger anzeigen
Suitable for
This set of tires fits front and rear
- All 1/8 Buggy and GT - Rally models with 17mm hexagon wheel hubs
- Absima - Stoke
- Arrma - Typhon
- Arrma - Infraction
- Arrma - Limitless
- Associated - RC8
- Associated - DB8
- Carson - Virus
- Carson - Specter
- Hobao - Hyper VS
- Losi - 8ight
- Mugen - MBX Series
- Mugen - MGT Series
- Sworkz - S35-GT
- Team Corally - Python XP
- X-Ray - XB-8
- X-Ray - GT8
- ..
Please check our "TIRE-WHEEL CAR CHART" to see if this Louise RC tire set is suitable for your RC vehicle.
Rims
Due to the extreme stresses of driving, cornering and high jumps, the rim design and materials used are extremely important. The right flexibility and stability allow the Louise RC wheels to withstand these extreme loads.
The Louise RC rims are made of a mixture of high quality nylon granules and, if required, additional fiber reinforced. These composite materials were developed by Dupont® specifically for Louise RC.
Tire inserts
The tires are mounted with either special preformed, or cut-to-size foam inserts. The inserts are selected at an optimum density and dimension to ensure perfect cushioning and dimensional stability of the tire.
Mounted - Bonded
Due to the extreme loads, the tire must be firmly bonded to the rim. Louise RC takes the utmost care to ensure that the tires are properly bonded. For years, she has been searching for the best way to bond the tires not only well, but also cleanly. Today Louise RC is considered one of the best in the RC industry. The tires are glued with a special rubber cyanoacrylate adhesive. This glue was specially developed for Louise RC to guarantee a perfect bonding that can withstand all extreme forces.
The following steps are performed in production at Louise RC to achieve perfect bonding;
- The rings of the tire to be bonded are lightly sanded and degreased.
- The surface of the rim to be bonded is lightly sanded and degreased.
- The tire is glued to the rim bed with cyanoacrylate adhesive using a special dispensing device. This ensures that the same amount of adhesive is always applied.
- The glued tire is pressed on for a certain time to ensure perfect adhesion and curing.
- Each tire undergoes a rotation and pull test to ensure a perfect bond.
MFT technology
MFT stands for Micro Fiber Technology. This technology indicates the presence of a band of fabric in the tire tread to prevent the tire from deforming and inflating at high speeds.
The MFT technology keeps the tire in its shape, even under heavy acceleration and top speeds.
The well-known inflation of a normal tire without MFT technology, which destroys the entire tire shape and where the diameter of the tire changes under these extreme conditions, is a thing of the past. The MFT technology provides more stability, significantly more ground contact and a longer tire life.
Important:
The tire with the MFT technology is usually slightly heavier and larger than normal tires without the MFT technology. We recommend checking the gear ratio and adjusting it if necessary. We also recommend updating your steering servo as these tires provide more grip and can overload a standard servo.
MFT Technology
MFT stands for Micro Fiber Technology. This technology indicates the presence of a band of fabric in the tire tread to prevent the tire from deforming and inflating at high speeds.
The MFT technology keeps the tire in its shape, even under heavy acceleration and top speeds.
The well-known inflation of a normal tire without MFT technology, which destroys the entire tire shape and where the diameter of the tire changes under these extreme conditions, is a thing of the past. The MFT technology provides more stability, significantly more ground contact and a longer tire life.
Important:
The tire with the MFT technology is usually slightly heavier and larger than normal tires without the MFT technology. We recommend checking the gear ratio and adjusting it if necessary. We also recommend updating your steering servo as these tires provide more grip and can overload a standard servo.
RACING compound
Louise RC's Racing tires are made from a special rubber compound that has high requirements for the grip the tire provides, but also for its wear. The racing tires are available in 2 different rubber compounds: soft and super soft. The tires also build up more grip when the ideal temperature is reached. Therefore, we always recommend to do some laps first to bring the tires up to temperature.
Technical data
- Vehicle type: 1/8 Rally - GT
- Rims driver: hexagon 17mm
- Rims Off-set: 0-Offset.
- Rims color: White
- Rims diameter: 83mm
- Rim type: Glued
- Rim Material: Nylon Composite
- Tire Technology: MFT - Micro Fiber Technology
- Tire Compound: Super Soft
- Tire Dimensions: 104x42mm
- Tire weight (1): 111 gg