The AGF-RC B53CHL V2 is a 20mm standard servo with a partial aluminum housing. The servo is HV capable and can be powered directly from a 2s LiPo (4.8 - 8.4V). With 32kg of actuating force, this Kraftproftz can show what it can do in various tasks. Whether in the wing model or in the Rc-Car the B53CHL V2 delivers a top performance at a very good price.the B53CHL V2 is also programmable with the optional USB Inteface AGF-SP. This requires a Windows computer running Windows 7 or 10.The servos...
mehr anzeigen
weniger anzeigen
The AGF-RC B53CHL V2 is a 20mm standard servo with a partial aluminum housing. The servo is HV capable and can be powered directly from a 2s LiPo (4.8 - 8.4V). With 32kg of actuating force, this Kraftproftz can show what it can do in various tasks. Whether in the wing model or in the Rc-Car the B53CHL V2 delivers a top performance at a very good price.the B53CHL V2 is also programmable with the optional USB Inteface AGF-SP. This requires a Windows computer running Windows 7 or 10.The servos are powered directly through the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point or the direction of rotation can be set. Furthermore, if needed, the Sanwa SSR mode can be activated which is especially interesting for RC car drivers. Also, the integrated overload cutoff can be adjusted in 3 steps and selected what should happen in case of signal loss.Of course, these are optional features, all servos can be operated directly out of the box normally and do not need to be adjusted before!
Drive frequency: 1520us // Up to 333Hz
Actuating time S1/60° (sec): 0,16
Actuating force S2 (kg*cm): 32
Actuating force S1 (kg*cm): 26
Voltage 2 (volts): 8,4
Voltage 1 (volts): 6,0
Height (mm): 37,2
Width (mm): 20
Length (mm): 40
Operating time S2/60° (sec): 0.135
Weight (g): 53
Gear type: Metal
Voltage range: 4.8V-8.4V
Packing: Standard
High voltage capability: Yes
Output teeth (number): 25
Application area: Boat
Application area: Car
Application area: Airplane
Application area: Helicopter
Housing type: Part metal
Ball bearings (quantity): 2
Motor type: Bell-type armature motor
Classification: Standard