replacement receiver harness for the Mamba XLX2 ESC.
features.
proper factory specified connectors (RX and AUX).
waterproof switch
factory specified wire gauge
To remove the receiver harness.
apply light pressure with your thumb on the capacitor trim.
hold the harness close to the 11-pin connector and gently pull away from the ESC at a slight angle to remove the harness from the ESC header.
note: Do not forcefully pull the harness out of the ESC. May cause damage to...
mehr anzeigen
weniger anzeigen
replacement receiver harness for the Mamba XLX2 ESC.
features.
proper factory specified connectors (RX and AUX).
waterproof switch
factory specified wire gauge
To remove the receiver harness.
apply light pressure with your thumb on the capacitor trim.
hold the harness close to the 11-pin connector and gently pull away from the ESC at a slight angle to remove the harness from the ESC header.
note: Do not forcefully pull the harness out of the ESC. May cause damage to ESC or harness.
to replace the receiver harness.
apply light pressure with your thumb on the capacitor trim.
following the wiring diagram on the side of the ESC's HOUSING, place the 11-pin connector on the ESC pin head.
note: Misalignment of the wiring harness will prevent the ESC from working. Make sure the brown wire is plugged in next to the negative (-) black power wire.
gently push on the 11-pin connector to fully connect to the ESC pin header.
reconnect the fan and receiver connectors.
castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from the date of purchase.
this product may contain chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm.
product designed in Olathe, Kansas USA.
product manufactured in China.