MOTOR
1412-6400KV
APPLICATION
Ideal for 2s No Prep Street Eliminator vehicles on 2s like Associated DR10, Losi 22S and Traxxas Drag Slash.
castle is pleased to introduce our latest offering to the drag racing scene. The new 1412-6400kv motor is a very high torque, high wattage, mid-RPM motor designed for 2s no prep Street Eliminator racing.
we took a slightly different approach than current motors on the market. Most no-prep motors are standard 540 size with very high kv...
mehr anzeigen
weniger anzeigen
MOTOR
1412-6400KV
APPLICATION
Ideal for 2s No Prep Street Eliminator vehicles on 2s like Associated DR10, Losi 22S and Traxxas Drag Slash.
castle is pleased to introduce our latest offering to the drag racing scene. The new 1412-6400kv motor is a very high torque, high wattage, mid-RPM motor designed for 2s no prep Street Eliminator racing.
we took a slightly different approach than current motors on the market. Most no-prep motors are standard 540 size with very high kv (low turn). These engines rely on high rpm and low torque to push the car down the track (think turbocharged 4 cylinders). The 1412 is longer than most drag engines, providing significantly more torque, acceleration, and cooler temperatures (think American Muscle); but still in a 540 diameter engine, so it fits most vehicles. This results in a high horsepower, snappy, cool running engine. Your final drive ratio will need to be reduced (larger pinion/smaller spur) to increase rpm for top speed. Because of the size of the engine, it needs just about every gear and CHEAT timing you can throw at it.
we have strengthened the design compared to a standard 14xx series motor to meet the high demands of drag racing. It uses a 5mm output shaft, 12AWG battery cable and 6.5mm balls. Due to the high performance of this motor, it is highly recommended to use a 1/8th size ESC or larger. The 1/8th scale Mamba Monster X and the 1/8th scale Mamba Monster X 8 are great pairings with this motor.
technical Data |
input voltage range. |
2S LiPo |
evt |
6400 |
max.RPM: |
75,000 |
size. |
length: 62.5 mm
diameter: 36 mm |
weight (with wires). |
283g (9.98 ounces) |
shaft Size. |
length: 21mm
diameter: 0.197" (5mm) |
mounting Hole Specifications. |
M3 @ 25mm |
fan. |
optional, coming soon! |
connector. |
6.5mm male Castle Bullet connector |
items needed for operation. |
compatible electronic speed control (ESC) |
application Guidelines. |
for 2WD Street Eliminator on 2s. |
recommended ESC(s). |
mamba Monster X, Mamba Monster X 8s. |
max. Recommended vehicle weight. |
see application guidelines |
technical Notes. |
running Modes: SmartSense™ Sensored and a high efficiency sensorless mode.
waterproof Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not waterproof; water can cause signal loss, which can lead to loss of sensing capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after wire installation. Routine maintenance is recommended after running in wet conditions. Please refer to this document for operation and maintenance of motors in wet environments.
|