Flysky FS002P Noble NB4+ transmitter with 1 receiver
Item number: FS002P
With the NB4 radio remote control from FlySky, comfort is a top priority when driving RC cars and boats. But the NB4 is not only ergonomically appealing, it can also keep up with other modern transmitters in terms of technology. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission.
In combination with this protocol, the advantages of a wireless WS2A system and the...
mehr anzeigen
weniger anzeigen
Flysky FS002P Noble NB4+ transmitter with 1 receiver
Item number: FS002P
With the NB4 radio remote control from FlySky, comfort is a top priority when driving RC cars and boats. But the NB4 is not only ergonomically appealing, it can also keep up with other modern transmitters in terms of technology. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission.
In combination with this protocol, the advantages of a wireless WS2A system and the new 2.4 GHz chip, the various transmitter parameters can be set dynamically. This includes the channel number, channel resolution, range, anti-interference requirements and also the latency. It is therefore possible to freely adjust the transmitter to your own requirements via the 3.5 inch TFT display. The real-time data exchange between the transmitter and the receiver also enables increased control over the flight model with constantly updated information on temperature and speed, for example.
Features:
Advanced, modern transmitter
Ergonomic design with swivel steering wheel
Suitable for right and left-handed users
Dual battery system
Intelligent RF configuration
Less than 3ms latency
Can also be used in simulations etc. Applications without USB dongle
Technical data:
>Sender |
Type: |
2.4GHz ISM |
Frequency protocol: |
AFHDS 3 |
Channels: |
4, 6, 8 (optional firmware options) |
RC models: |
Auto, Boot |
Distance: |
>300m (ground) |
Channel resolution: |
4096 |
Battery: |
- 1S / (4.2V) x 4300mAh LiPo - 2600mAh 18650 dual battery |
Low voltage warning: |
< 3,65V |
Antenna type: |
Built-in single antenna |
Display: |
HVGA 3.5-inch TFT, resolution 320x480px |
Simulator: |
USB Simulator |
Charging interface: |
Micro-USB |
Data interface: |
Micro-USB |
Temperature range: |
-10°C to +60°C |
Humidity range: |
20% to 95% |
Online update: |
Yes |
Dimensions: |
129x114x190mm |
Weight: |
520g |
Receiver
|
>FGr4 |
FGr4S |
PWM: |
4 |
4 |
Type: |
2.4GHz ISM |
Frequency protocol: |
AFHDS 3 |
Suitable transmitters: |
All transmitters with AFHDS3 support |
Antenna type: |
Single antenna |
Voltage: |
3.5-12V |
3.5-8.4V |
Data interface: |
PWM/PPM/i-BUS/S.BUS |
Temperature range: |
-10°C to +60°C |
Humidity range: |
20% to 95% |
Online update: |
Yes |
Dimensions: |
29x22x16.2mm |
25.5x22x17.3mm |
Weight: |
8g |
5,1g |
Scope of delivery:
FlySky "NB4" transmitter
Receiver: FGr4 and FGr4S
USB data cable
Grip shell
Springs (S, L)
2x transparent protective film
Instructions