Scope of delivery
Interior 1 pc. Sticker 1 pc. Steering wheel 1 pc. Handbrake 1 pc. Glove box 1 pc. Gear stick 1pce. Foot brake pedal 1pce. Supplied in unpainted condition so you can paint different colors as you wish.
Suitable for Traxxas TRX4 Defender
Installation Step 1 1. Before applying the paint, cut the transparent shell according to the size of the shell and cut off the extra material on the edges. 2. Follow the cut lines to cut out the center and seat portion. 3. Be...
mehr anzeigen
weniger anzeigen
Scope of delivery
Interior 1 pc.
Sticker 1 pc.
Steering wheel 1 pc.
Handbrake 1 pc.
Glove box 1 pc.
Gear stick 1pce.
Foot brake pedal 1pce.
Supplied in unpainted condition so you can paint different colors as you wish.
Suitable for Traxxas TRX4 Defender
Installation Step 1
1. Before applying the paint, cut the transparent shell according to the size of the shell and cut off the extra material on the edges.
2. Follow the cut lines to cut out the center and seat portion.
3. Be careful not to cut out too much. Additional cutting can be done during the installation process.
4. Apply paint once cutting is complete. Note: Remove any oil before coloring.
5. To create more space, it is recommended to cut off the rear body pillar after coloring.
Installation Step 2
1. After the coloring is completed, attach decals according to the corresponding position.
2. Carefully attach the steering wheel, foot brake pedal, gear stick and other accessories. The steering wheel is movable, pay attention to the installation direction.
Installation Step 3
1. Install the central part. First remove the front skid plates.
2. Remove the original screws. When installing, make sure it is level from the front gearbox. Retighten the screws after adjustment.
Installation Step 4
1. Installing the seats. First remove the rear skid plates and spare wheel stabilizer.
2. Due to the removal of the spare wheel stabilizer parts, if the original spare wheel stabilizer is needed, please fix it with a lock nut.
Installation step 5
1. Fix the center section and the seats with screws.
2. Install the front wheel and skid plates.
3. After installation, raise the front and rear body posts on the original shell by one positioning hole. Note: Each installation may vary and raise or lower the positioning hole as needed.