Junsi iCharger X6 Charger 800W up to 6s LiPo With the new iCharger X6, the renowned manufacturer Junsi has launched a pocket-sized charger. The new X6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite the small dimensions of 83x65x37 mm, no compromises have been made in terms of performance and ease of use. The technical data can be seen, 800W charging power (from 23.5V), 1-6s LiPo cells and up to 30Amp...
mehr anzeigen
weniger anzeigen
Junsi iCharger X6 Charger 800W up to 6s LiPo
With the new iCharger X6, the renowned manufacturer Junsi has launched a pocket-sized charger.
The new X6 charger combines the advantages of the well-known Junsi iCharger 406DUO with the portability of a small pocket charger. Despite the small dimensions of 83x65x37 mm, no compromises have been made in terms of performance and ease of use.
The technical data can be seen, 800W charging power (from 23.5V), 1-6s LiPo cells and up to 30Amp charging current are sufficient even for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.
The discharge power is 30Watt, but can be increased up to 900W by external load (discharge resistor). Of course, the iCharger X6 also masters regenerative charging. In this case, the battery capacity of a full flight battery, for example, is fed back into the supply battery.
The balancer current of 2 amps always ensures perfectly balanced cell voltages.
A USB port and Micro SD slot can be used for logging data, but also for future updates.
The menu is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2,4&ldquo IPS LCD display ensures good readability even in low light.
A German manual can be found here.
All Junsi chargers of the X and DUO series are developed and approved for use in model making. An industrial use is not intended and therefore not allowed!
Micro SD card slot: Yes
Accuracy Balancer (depending on setting): 1mV
Balancer compensation current per output: 2A
Max. Voltage lead batteries: 24V
Max. Number of NiCd/NiMH batteries: 20
External high current discharge Asynchronous: 900W
Discharge current adjustable with regeneration: 800W
Discharge power per output: 30W
Charge current adjustable per output: 30A
Input current limit: >35A
Input voltage: 7-32V
Power supply integrated: No
Max. Charging current: 30A
Max. Power: 800W
Max. Discharge power: 30A
Weight (g): 168
Height (mm): 65
Width (mm): 83
Length (mm): 83