AE90037
Champions by design
Just as tires, motors, batteries and race tracks continue to evolve, Team Associated continues to improve the RC10 with each release. The engineers at Team Associated's Area 51 set out to get more performance out of the RC10B74 4WD buggy platform with the introduction of the RC10B74.2 and RC10B74.2D. Our goal was to reduce overall weight, lower the center of gravity, and improve jumping, landing, and handling over bumps in the track. We exceeded expectations.
RC10B74.2 and RC10B74.2D feature new injection-molded front and rear gear cases that lowered the center of gravity by eliminating heavy, high-mounted parts. The differentials have been reworked to increase roll rate in corners and handling stability on landing, making the buggy quicker around corners on grippy clay and carpet tracks. Team Associated's new 13mm inner diameter shocks take the RC10B74.2's bounce, landing and handling over track bumps to a whole new level of performance. With Gullwing control arms on the front axle and LTC gearsets in the differentials, the RC10B74.2 platform is now easier and more predictable to drive in all track conditions.
Features :
- New, lightweight injection molded transmission housings front and rear. For front, two housings with different fixed differential heights (0 mm/ +2 mm). Rear housing with inserts to adjust differential height in 0, +1, +2 and +3mm increments as on the RC10B6.
-
New 13mm Big Bore threaded shocks with aluminum housing, machined piston plates and springs for better handling on bumps and jumps.
-
New Gullwing control arms and matching shock tower on front axle for lower center of gravity and more predictable steering response.
- LTC gearsets included for lower friction and more predictable power delivery
- New battery holder with inserts to adjust weight distribution. O-rings with molded-on grip surfaces.
- New, reinforced 3.5mm thick tension axles with revised ball clamps to reduce friction and increase stability.
-
New center bulkhead mount fan bracket that positions the fan directly above the engine for better cooling.
-
New 2 mm lower wing brackets to lower the center of gravity even further when using slicks or low-profile carpet tires.
-
3 mm higher aluminum steering bridge for optimized bumpsteer behavior during low-clearance compression.
-
66 mm longer rear CVA driveshafts for more traction under load and more predictable feel.
- RC10B74.2D: Center differential with 72Z and 78Z main gears and 200,000 CST silicone oil.
Note: Electronics, tires, rims and sprockets is not included. The delivery of the body is unpainted.
Recommended accessories:
-
Engine for 10.5T Stock class: RUDDOG-Racing-RP542-105T-540-Stock-Sensored-Brushless-Engine  https://RUDDOG-Racing-RP542-105T-540-Stock-Sensored-Brushless-Motor
-
Motor for Modified class: RUDDOG-Racing-RP542-65T-540-Sensored-Brushless-Motor  https://RUDDOG-Racing-RP542-65T-540-Sensored-Brushless-Motor
- Speedcontroller: RUDDOG-Racing-RXS-Brushless-Speed-Controller  https://RUDDOG-Racing-RXS-Brushless-Speed-Controller
-
Servo: RUDDOG-Racing-RCL1706-HV-Coreless-Mid-Size-Servo-17kg-006s  https://RUDDOG-Racing-RCL1706-HV-Coreless-Mid-Size-Servo-17kg-006s
-
Battery for 5min drive time: RUDDOG-Racing-4200mAh-150C-75C-74V-LCG-Short-Stick-Pack-LiPo-Battery  https://RUDDOG-Racing-4200mAh-150C-75C-74V-LCG-Short-Stick-Pack-LiPo-Battery
-
Battery for 7min driving time: RUDDOG-Racing-6000mAh-150C-75C-74V-Short-Stick-Pack-LiPo-Battery  https://RUDDOG-Racing-6000mAh-150C-75C-74V-Short-Stick-Pack-LiPo-Battery
-
Receiver for Sanwa Remote Controls: RUDDOG-RR482-24GHz-4-Channel-FHSS4-Receiver  https://RUDDOG-RR482-24GHz-4-Channel-FHSS4-Receiver
-
Tools: Tool sets_1  https://Werkzeug-Sets_1
-
Motor Fan: RUDDOG-30mm-Aluminum-HV-High-Speed-Cooling-Fan  https://RUDDOG-30mm-Aluminium-HV-High-Speed-Cooling-Fan
Recommended Tuning Parts:
- Revolution-Design-B742-B741-B74-Aluminum Bellcrank Set  RevolutionDesign B74.2 | B74.1 | B74 Aluminum Bellcrank Set
- Revolution-Design-B742-B741-B74-Fan-Mount-with-RUDDOG-30mm-HV-Fan  Revolution Design B74.2 | B74.1 | B74 Fan Mount with RUDDOG 30mm HV F
- Team-Associated-RC10B742-FT-Rear-Gearbox-Pinion-Height-Inserts-machined>TeamAssociated RC10B74.2 FT Rear Gearbox Pinion Height Insert
- Revolution-Design-B742-Ultra-Battery-Mount-Set  RevolutionDesign B74.2 Ultra Battery Mount
- Team-Associated-RC10B742-FT-Top Plate Kit  TeamAssociated RC10B74.2 FT Top Plate Kit
- RUDDOG-B741-B74-Carbon Fiber Side Guard Set  RUDDOGB74.1 | B74 Carbon Fiber Side Guard Set
- Revolution Design-B742-25mm-7075-Aluminum Chassis Set  RevolutionDesign B74.2 2.5mm 7075 Aluminum Chassis Set