Punisher XP 6S RTR Long Wheel Base Monster Truck (C-00171)
"Punish the Competition" with the Punisher XP 6S Monster Truck from Team Corally!
A 1/8th scale monster truck is the top choice for serious bashers because it can reach incredible top speeds and handle virtually any type of track, surface or terrain. Team Corally's Punisher XP 6S 4WD 1/8 Scale Brushless Monster Truck RTR is based on the same platform as the highly acclaimed Kronos XP 6S and features a redesigned body,...
mehr anzeigen
weniger anzeigen
Punisher XP 6S RTR Long Wheel Base Monster Truck (C-00171)
"Punish the Competition" with the Punisher XP 6S Monster Truck from Team Corally!
A 1/8th scale monster truck is the top choice for serious bashers because it can reach incredible top speeds and handle virtually any type of track, surface or terrain. Team Corally's Punisher XP 6S 4WD 1/8 Scale Brushless Monster Truck RTR is based on the same platform as the highly acclaimed Kronos XP 6S and features a redesigned body, graphics package, wheels and tires. With a massive 6S LiPo power and a 2050KV brushless motor, you can completely dominate smaller models on the track, in the skate park or on the bash spot. With its aggressive appearance, racing-inspired design and comfortable suspension, the Punisher XP 6S can handle the toughest conditions and most challenging terrain.
With its independent suspension, rugged all-metal four-wheel drive, racing chassis, stump-pulling power and aerodynamic racing body, the Punisher XP 6S is the ultimate electric 1/8 monster truck for drivers seeking an unparalleled bashing experience.
Year round driving, anytime, anywhere
The Team Corally Punisher XP 6S monster truck is equipped with full water-resistant electronics, making it ready to drive in almost any conditions. Not only is the controller resistant to splashing water and mud, but the steering servo and receiver are also protected from the elements by special waterproof circuit board coatings. The receiver is further protected from dust, mud and moisture by a sealed housing. Of course, the Punisher XP 6S comes standard with aerospace-grade rubber-sealed ball bearings, so you can drive virtually anywhere and in almost any conditions
(Please note: No RC vehicle should be driven or submerged in water or mud. Use caution when driving in extreme conditions and perform proper maintenance such as cleaning and lubrication after driving in mud, water or near salt water).
Features of the Punisher XP:
-
100+ km/h (60+ mph) possible
-
Factory-built, competition-ready 1/8 scale truggy with mounted electronics, body and tires
-
Team Corally TOROX 185 ESC 4-6S with LiPo under voltage protection (programmable)
-
Team Corally Kuron 2050kV 4-pole brushless motor (4-6S operation)
-
Varioprop CRHV-7225 high torque, high voltage digital servo with metal gearbox, and 25Kg of torque
-
Ergonomic Varioprop S2R transmitter, with interference-free 2.4GHz technology
-
Aluminum servo arm for precision and strength
-
3mm 7075 aluminum steering Ackermann plate
-
Separate splash-proof and dust-proof electronic box with transponder holder
-
Adjustable battery holder for all common LiPo batteries
-
Complete set of aerospace grade rubber sealed ball bearings
-
oversized 8 x 16 x 5mm gear ball bearings
-
Hardened steel spur gear and motor pinion gear
-
Three sealed metal differentials, individually filled with silicone fluid
-
Aluminum/steel center differential
-
Quick and convenient access to the differential
-
2-piece aluminum engine mount with composite transmission cover
-
52T steel spur gear
-
Fully hard coated metal drive train
-
Extra surface hardened steel CVD front joints
-
Aluminum 17 mm drive hex
-
oil-filled 16 mm threaded aluminum Big Bore shocks
-
Exclusive shock absorber spring plate locking system
-
CNC aluminum shock towers, 5 mm rear / 4 mm front
-
Aluminum upper arm stiffening plate front
-
Independent front suspension with pivot ball
-
Independent suspension with double wishbone in the rear
-
Optimized composite parts manufactured to customer specifications
-
Heavy-duty one-piece composite suspension links and tie rods
-
Aluminum suspension mounts with composite cover
-
Team Corally RSP stabilizer bar front and rear
-
Aluminum chassis plate
-
Heavy duty chassis braces front and rear
-
Reinforced chassis side guards with integrated body protection
-
Front bumper with additional shock absorbing chassis protection
-
Reinforced High-Down Force wing and wing bracket
-
Factory-applied high-speed low-profile tires on black multi-spoke composite wheels
-
Durable and attractive printed polycarbonate bodywork
-
Many optional tuning parts available for customizationRacing style chassis for extreme performance
Inspired by top-of-the-line professional racing machines, the Punisher XP 6S features a pan-style aluminum chassis that is the most efficient and durable chassis design available. With optimized weight distribution to the front, the heaviest drive components and other systems are kept as close to the front as possible. Rugged, triangular chassis braces front and rear provide additional rigidity that allows the aluminum Big Bore shocks and HiCC8 composite suspension elements to work without the negative effects of chassis plate flex. The reinforced composite chassis side panels feature integrated front bars that provide additional protection for the polycarbonate body and electronics. Team Corally's exclusive SPL system secures the shock absorber spring plates and prevents the springs from shifting during extreme compression and extension, while the innovative RSP Sway Bar system keeps the Punisher firmly in control in the corners and ensures consistent handling on all surfaces.
Massive 2050KV Brushless Power
Featuring the Team Corally Kuron 2050KV 4-pole motor mounted on a torsionally rigid, 2-piece aluminum motor sled,you can be sure to achieve maximum speeds for big air stunts! The motor is equipped with a hardened steel pinion that works together with a hardened steel spur gear on the center differential
Want to reach remarkable top speeds with a pull of the trigger? Speeds of over 110 km/h (70+ mph) are no problem - just install the right battery!
LiPo Power Ready
The Punisher's battery mount can accommodate batteries of all popular sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can be powered by 4S-6S LiPo batteries to optimize performance on any surface and in any conditions!
Durable steel drive system with three fluid-filled differentials
The Punisher is equipped with front, center, and rear silicone fluid-filled sealed locking differentials that ensure the full power of the 2050KV Kuron engine hits the ground like you'd normally only find on premium RC cars. With easy disassembly and maintenance, you can even modify each differential individually to fine-tune traction at either end of the truggy! Inside, you'll find a full set of metal gears and outdrive cups connected to steel central driveshafts. The front end is driven by CVD drive shafts, while the rear end is driven by sturdy metal dogbones. The entire drive train is supported by 8x16x5mm aerospace grade rubber sealed ball bearings for maximum efficiency and durability.
High quality aluminum/steel center differential
The Punisher XP 6S center differential features an aluminum alloy housing and durable steel spur gear for unmatched performance and reliability. The metal housing allows for optimal alignment of the internal gear assembly by improving heat dissipation and reducing fluid loss, while the steel spur gear ensures maximum power output and resistance to damage from dirt or debris.
Skid plates and struts
The Punisher features improved composite front and rear skid plates to protect the chassis and critical suspension components, especially in the case ofinsane big air jumps. The rear wing mount features additional bracing to ensure proper wing alignment during the heaviest jumps and occasional crashes.the additional front upper arm brace ensures that critical suspension components remain properly aligned during the toughest bashing.
Adjustable battery mount
The innovative battery mount allows the Punisher XP 6S to conveniently mount almost any 4S-6S LiPo manufactured for area vehicles. This protects your battery investment while providing optimal weight distribution.
Optimized Racing Suspension
The Punisher XP 6S features a robust pivot-ball front suspension with steel pivots and steering tie rods, as well as rugged composite control arms. The rear suspension features composite outer hubs and one-piece composite upper suspension links. At each corner, rugged HiCC8 composite control arms and threaded, adjustable 16mm large-bore oil shocks provide a smooth, compliant ride.
Multi-Block Stunt Tires
These grippy rubber tires are designed specifically for monster bashing. They feature foam inner layers and are bonded to aggressive looking honeycomb spoke wheels on 17mm hex hubs. The aggressive tread pattern combined with the low-profile sidewall design minimizes ballooning for maximum grip and control on any terrain.
Varioprop S2R steering wheel control
The Punisher is fully controlled by the ergonomically designed pistol grip-style radio transmitter, which features the latest 2.4 GHz technology for interference-free control at a distance of 300 meters. The realistic steering wheel design makes driving intuitive and comfortable. The pistol grip trigger provides perfect throttle control, combining forward and reverse control in a single control. Learning to control the Punisher is quick and easy with the S2R controller!
The Punisher XP 6S RTR is an exciting, impressive all-terrain machine! If you're looking for an all-out assault on lesser cars with speed and bounce that other cars just can't duplicate, then look no further than thePunisher XP 6S RTR from Team Corally
Technical data:
Brand name - Team Corally
Scale - 1/8 scale
Car Model - Type Electrically Powered 4WD Monster Truck RTR - 6S Brushless Power
Length (mm) - 590 mm
Width (mm) - 455 mm
Height (mm) - 219 mm
Wheelbase (mm) - 384 mm
Weight (g) - 4700 G
Transmission - 4WD cardan drive
Ball bearings - Full set of ball bearings
Motor Type - 2050kV 2-6S 4 pole brushless motor
ESC Type - Water Resistant 11.1 - 22.2V Brushless - Programmable with LiPo Shutdown
Servo type : Digital - High voltage - Metal gearbox - 25 kg torque
Battery type - Not included
Dimensions of the battery carrier (LxWxH): 143x50,5x50 mm
RC functions - Right/Left/Forward/Brake/Reverse
Charger - Not included
Max. possible speed 100+ km/h
Order directly - necessary for use:
- 1x battery and charger (XT90 connector)
- 4x AA battery for the handheld transmitter