Radix 6 XP 6S Racing Buggy (C-00185)
Experience radical performance with the Radix 6 Racing Buggy from Team Corally !
Few RC experiences can match the unparalleled speed, handling, durability and performance of a premium 1/8 Scale electric 4WD buggy, and the new Radix 6 XP 4WD 1/8 Scale Brushless Buggy from Team Corally delivers this and more in a convenient RTR package! With a 4-6S LiPo powering the included 2050KV brushless motor, you can fully dominate the track or...
mehr anzeigen
weniger anzeigen
Radix 6 XP 6S Racing Buggy (C-00185)
Experience radical performance with the Radix 6 Racing Buggy from Team Corally !
Few RC experiences can match the unparalleled speed, handling, durability and performance of a premium 1/8 Scale electric 4WD buggy, and the new Radix 6 XP 4WD 1/8 Scale Brushless Buggy from Team Corally delivers this and more in a convenient RTR package! With a 4-6S LiPo powering the included 2050KV brushless motor, you can fully dominate the track or terrain. Want to go racing? It should come as no surprise that the Radix 6 XP is a perfect entry-level race car for competitive 1/8 Electric 4WD buggy racing (with 4S power).
With a durable, efficient all-metal four-wheel drive, independent suspension, racing chassis, and high downforce aerodynamic racing body, this is the ultimate 1/8 electric buggy for those looking for incredible speeds, unmatched handling, and durability that will survive almost any racing or bashing conditions.
Year round driving, anytime, anywhere !
The Team Corally Radix 6 XP Racing Buggy has a full complement of waterproof electronics, so it's ready to race in almost any conditions. Not only is the controller resistant to splashing water and mud, but the steering servo and receiver are also protected from the elements by special waterproof circuit board coatings. The receiver is further protected against dust, mud and moisture by a sealed housing. Of course, aerospace-grade rubber-sealed ball bearings are standard on the Radix 6 XP, so you can drive virtually anywhere and in almost any conditions.
(Please note: no RC vehicle should be driven or submerged in water or mud. Use caution when driving in extreme conditions. Proper maintenance such as cleaning and lubrication should be performed after driving in mud, water or near salt water).
Radix 6 Features:
-
100+ km/h (60+ mph) capability
-
Factory-built, competition-ready 1/8 scale buggy with electronics, body and tires mounted
-
Team Corally TOROX 185 ESC 4-6S with LiPo under voltage protection (programmable)
-
Team Corally Kuron 2050kV 4-pole brushless motor (4-6S operation)
-
Varioprop CRHV-7225 High Torque, high voltage digital servo with metal gearbox and 25Kg torque
-
Ergonomic Varioprop S2R transmitter, with interference-free 2.4GHz technology
-
Aluminum servo arm for precision and strength
-
3mm 7075 aluminum steering Ackermann plate
-
Separate splash-proof and dust-proof electronics box with transponder holder
-
Adjustable battery holder for all common LiPo batteries
-
Complete set of aerospace grade rubber sealed ball bearings
-
oversized 8 x 16 x 5mm gear ball bearings
-
Hardened steel spur gear and motor pinion gear
-
Three sealed metal differentials, individually filled with silicone fluid
-
Aluminum/steel center differential
-
Quick and convenient access to differential
-
2-piece aluminum motor mount with composite gear cover
-
46T steel spur gear
-
Fully hard-coated metal drivetrain
-
Extra surface hardened steel CVD front joints
-
Aluminum 17 mm drive hex
-
oil-filled 16mm threaded aluminum Big Bore shocks
-
Exclusive shock absorber spring plate locking system
-
CNC aluminum shock towers, 5 mm rear / 4 mm front
-
Aluminum front upper arm stiffener plate
-
Independent front suspension with pivot ball
-
Independent rear suspension with double wishbones
-
Optimized, customized composite parts
-
Heavy-duty one-piece composite suspension links and tie rods
-
Aluminum suspension mounts with composite cover
-
Team Corally RSP stabilizer bar front and rear
-
Aluminum chassis plate
-
Heavy duty chassis braces front and rear
-
Reinforced chassis side guards with integrated body protection
-
Front bumper with additional shock absorbing chassis protection
-
Reinforced High-Downforce wing and wing bracket
-
Factory-applied high-speed low-profile tires on black 5-spoke composite wheels
-
Durable and attractive printed polycarbonate bodywork
-
Many optional tuning parts available for customizationRacing style chassis for extreme performance !
Inspired by professional racing machines at the top of the RC industry, the Radix 6 XP uses a pan-style aluminum chassis for the most efficient and durable chassis layout. With optimized weight distribution to the front, the heaviest drive components and other systems are kept as close to the front as possible. Robust, triangular chassis braces front and rear provide additional rigidity that allows the aluminum Big Bore shocks and HiCC8 composite suspension elements to work without the negative effects of chassis plate flex. The reinforced composite chassis side panels feature integrated front bars that provide additional protection for the polycarbonate body. Team Corally's exclusive SPL system secures the shock absorber spring plates and prevents the springs from shifting during extreme compression and extension, while the innovative RSP Sway Bar system keeps the Radix 6 firmly in control during cornering and ensures consistent handling on all surfaces.
Massive 2050KV brushless power !
With the Team Corally Kuron 2050KV 4-pole motor mounted on a torsionally rigid 2-piece aluminum sleeve bearing, you can be sure to reach maximum speeds for big-air stunts! The motor is equipped with a hardened steel pinion gear that works in conjunction with a hardened steel spur gear on the center differential.
Want to reach remarkable top speeds with a pull of the trigger? Speeds of over 100 km/h are no problem - just put in the right battery!
LiPo Power Ready !
The Radix 6's battery holder can accommodate batteries of all popular sizes and is adjustable for maximum versatility. The versatile Team Corally Kuron 2050KV motor can be powered by 4S-6S LiPo batteries to optimize performance on any surface and in any conditions!
Durable steel drive system with three fluid-filled differentials !
The Radix 6 is equipped with three fluid-filled and sealed locking differentials that ensure the full power of the 2050KV Kuron motor hits the ground in a way normally only seen on premium RC vehicles. With easy disassembly and maintenance, you can even adjust each differential individually to fine-tune traction at both ends of the buggy! Inside, you'll find a full set of metal gears and outdrive cups connected to steel central driveshafts. The front end is driven by CVD driveshafts, while the rear end is driven by sturdy metal dogbones. The entire drive train is supported by 8x16x5mm aerospace grade rubber sealed ball bearings for maximum efficiency and durability.
High quality aluminum/steel center differential !
The Radix 6 XP's critical center differential features an aluminum alloy housing and durable steel spur gear for unmatched performance and reliability. The metal housing allows for optimal alignment of the internal gear assembly by improving heat dissipation and eliminating fluid loss, while the steel spur gear ensures maximum power output and resistance to damage from dirt or debris.
Convenient one-piece composite steering rods and upper suspension links !
The Radix 6 XP features HiCC8 composite nylon handlebars with captured articulated balls that ensure proper alignment with ideal suspension and steering geometry.
Optimized racing suspension !
The Radix 6 XP features a robust pivot-ball front suspension with steel pivots and steering tie rods and robust composite control arms. The rear suspension features composite external hubs and one-piece composite upper suspension links. At each corner, rugged HiCC8 composite control arms and threaded, adjustable 16mm large-bore oil shocks provide a smooth, compliant ride.
High speed all terrain tires !
The Radix 6's tires feature foam inner layers and are bonded to super-rugged multi-spoke wheels attached to 17-mm hex hubs. The innovative, multi-surface tread is at home on both dirt and asphalt and is made from a special rubber compound that provides amazing forward bite and cornering grip while minimizing ballooning for maximum control at any speed and in all conditions.
Varioprop S2R steering wheel control !
The Radix 6 is fully controlled by the ergonomically designed, pistol-grip radio transmitter, which features the latest 2.4 GHz technology for interference-free control at a distance of 300 meters. The realistic steering wheel design makes driving intuitive and comfortable. The pistol grip trigger provides perfect throttle control, combining forward and reverse control in a single control. Learning to control the Radix 6 is quick and easy with the S2R control!
The Radix 6 XP RTR is an innovative, durable and versatile off-road machine! If you love the sleek looks, unmatched performance, and razor-sharp handling that only 1/8th buggies can provide to storm tracks, destroy spots, or make awesome jumps over the toughest terrain, then look no further than the Radix 6 XP!
TechnicalData
Brand name - Team Corally
Scale - 1/8 scale
Vehicle Model Type - Electric 4WD Racing Buggy RTR - 6S Brushless Power
Length (mm) - 497 mm
Width (mm) - 305 mm
Height (mm) - 175 mm
Wheelbase (mm) - 326 mm
Weight (g) - 3370 g
Transmission - 4WD cardan drive
Ball bearings - Full set of ball bearings
Motor Type - 2050kV 2-6S 4 pole brushless motor
ESC Type - Water Resistant 11.1 - 22.2V Brushless - Programmable with LiPo Shutdown
Servo type - Digital - High voltage - Metal gearbox - 25 kg torque
Battery type - Not included
Dimensions of the battery carrier - (LxWxH): 143x50,5x50 mm
RC functions - Right/Left/Forward/Brake/Reverse
Charger - Not included
Max. possible speed - 110+ km/h
Order directly - necessary for use:
- 1x battery and charger (XT90 connector)
- 4x AA battery for the handheld transmitter