Suitable for This set of tires fits front - rear - All scale crawlers with 2,2' wheels and a 12-mm hexagonal wheel driver - Axial - RR 10 - Axial - Wraith 2.2 - Axial - Yeti 10th - .. Please check our 'TIRE-WHEEL CAR CHART' to see if this Louise RC tire set is suitable for your RC vehicle. Rims Due to the extreme stresses of driving, cornering and high jumps, the rim design and materials used are extremely important. The right flexibility and stability allow the Louise RC wheels to...
mehr anzeigen
weniger anzeigen
Suitable for
This set of tires fits front - rear
- All scale crawlers with 2,2' wheels and a 12-mm hexagonal wheel driver
- Axial - RR 10
- Axial - Wraith 2.2
- Axial - Yeti 10th
- ..
Please check our 'TIRE-WHEEL CAR CHART' to see if this Louise RC tire set is suitable for your RC vehicle.
Rims
Due to the extreme stresses of driving, cornering and high jumps, the rim design and materials used are extremely important. The right flexibility and stability allow the Louise RC wheels to withstand these extreme loads.
The Louise RC wheels are made from a blend of high quality nylon granules with additional fiber reinforcement where needed. These composite materials were developed by Dupont® specifically for Louise RC.
Tire inserts
The tires are mounted either with special preformed, or with cut-to-size foam inserts. The inserts are selected at an optimum density and dimension to ensure perfect cushioning and dimensional stability of the tire.
Mounted - Bonded
Due to the extreme loads, the tire must be firmly bonded to the rim. Louise RC takes the utmost care to ensure that the tires are properly bonded. For years, it has been searching for the best way to bond the tires not only well, but also cleanly. Today, Louise RC is considered one of the best in the RC industry. The tires are glued with a special rubber cyanoacrylate glue. This glue was specially developed for Louise RC to guarantee a perfect bonding that can withstand all extreme forces.
The following steps are performed in production at Louise RC to achieve perfect bonding;
- The rings of the tire to be bonded are lightly sanded and degreased.
- The surface of the rim to be bonded is lightly sanded and degreased.
- The tire is glued to the rim bed with cyanoacrylate adhesive using a special dispensing device. This ensures that the same amount of adhesive is always applied.
- The glued tire is pressed on for a certain time to ensure perfect adhesion and curing.
- Each tire undergoes a rotation and pull test to ensure a perfect bond.
CRAWLER compound
Crawler tires have a completely different tire structure, and the rubber compound is very different for their specific use. The tire needs to be very flexible to handle the obstacles, but it also needs to provide a lot of grip on the different surfaces. Crawlers are driven at slow speeds and the obstacles must be mastered, so tires are critical to a successful crawler tour.
Louise RC Crawler tires are a reference among crawler drivers. If you are looking for excellent grip on all kinds of different surfaces, Louise RC Crawler tires are the right choice.
Technical data
- Vehicle type: 1/10 crawler
- Rims Driver: Hexagon 12mm
- Rims Off-set: 0-Offset.
- Rims color: Black
- Rims diameter: 2.2' - 56mm
- Rim Type: Bonded
- Rim Material: Nylon Composite
- Tire Technology: Standard
- Tire Compound: Crawler - Super Soft
- Tire Dimensions: 148x57mm
- Tire weight (1): 178g