Specifications:
Alloy zinc and alloy aluminum casting (except tracks and hydraulic pump)
Welded steel bucket
9-channel 2.4GHZ radio
Heavy duty hoses (OD 3.2mm nylon, ID 2.2mm)
Heavy duty main hoses (OD 4mm nylon, ID 2.5mm)
Optimized steel hydraulic system
Reliable hydraulic valve and adjustable pump.sible hydraulic valve and adjustable pump
Brushless hydraulic system
Full metal scale
All terrain metal crawler
540 brushed monster torque engine
Full metal transmission (1:256 gear ratio)
Run time is: 38 minutes (5300mAh battery)
Chrome steel oil pump (47.5mm x 35mm x 36mm)
Bucket capacity: 494949 mm_
Maximum bucket force (bottom): 76kg / 167pounds
Maximum bucket force (up): 50kg / 110pounds
Maximum bucket force (thrust): 50kg / 110pounds
Travel speed: 408 meters per hour
Scale: 1:14
Length: 27in / 685mm
Width: 13.8in / 351mm
Height: 12.7in / 323mm
Bucket Height: 174.6mm (6.87 inches)
Maximum Bucket Up and Down Tilt Angle: 29 degrees
Maximum Bucket (Left and Right) Tilt Angle: 9 degrees
Maximum Ground Rip Depth: 50mm / 1.97in
Total mass load: 37kg / 82LBs
Operating oil pressure: 25Bar, 362.5psi
Tare weight: 26kg / 57LBs
Manufactured by JDCustoms
Included in delivery:
1x 1/14 scale DXR2 Hydraulic Earth Moving Machine
Required Parts:
3S Lipo (Gens Ace) Battery
8x AA Batteries for Radio (Z-S1718)
Gens Ace 5000mAh 11.1V 50C 3S1P Short-Size Lipo Battery Pack with XT60 Connector
Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)
Compatible Charger for 3S Lipo Battery
Spare Parts:
Earth Digger 4200XL Brushed ESC (VVV-S0011)
DXR2 dozer (VVV-S0166)
Notes:
While some components are shipped assembled, it may be in your best interest to check the products to make sure all parts are tight. In some cases, you may want to apply thread locker to some of the parts that are already installed.
ESC Supports Bullet Connector
Use high quality hex wrenches to prevent stripping of bolt heads.
Use thread locker when screwing metal bolts into metal parts.
Steps marked with an asterisk (*) require thread locker.
Use thread locker sparingly.
Do not overtighten screws or the threads may strip.
Do not adjust the oil pressure switch.
Each unit is professionally assembled, adjusted and tested.
Oil pressure may drop over time.