Earth Excavator 360L 1:14 scale hydraulic excavator is even more powerful than its predecessor! Designed for those who want reliability, unparalleled looks and raw power to make this project a reality. Made with CNC machined metal parts, it is fully assembled and ready to dig! Be ready for the tremendous power provided by the high performance brushless system. Let's dig! Note: This product is not for first time RC hobbyists and should not be used by anyone under the age of...
mehr anzeigen
weniger anzeigen
Earth Excavator 360L 1:14 scale hydraulic excavator is even more powerful than its predecessor! Designed for those who want reliability, unparalleled looks and raw power to make this project a reality. Made with CNC machined metal parts, it is fully assembled and ready to dig! Be ready for the tremendous power provided by the high performance brushless system. Let's dig!
Note: This product is not for first time RC hobbyists and should not be used by anyone under the age of 16.This product is considered to be quite difficult. Also, we recommend that only experienced RC hobbyists purchase this product.
Specifications:
Alloy zinc and alloy aluminum casting (except hydraulic pump)
Custom 8-channel 2.4 GHz radio
Pre-installed high power light sources (wire and glow(wire and bulbs not included)
Optimized steel hydraulic system
Scale Driving Figure Ready (Not included)
Alloy galvanized track (50mm width)
Efficient undercarriage
Reliable hydraulic valve and adjustable pump
Heavy-duty hoses (outer diameter 4.5 mm).(outer diameter 4.5mm nylon, ID 2.5mm)
Undercarriage can rotate 360 degrees (endless)
Powder coated in yellow and gray
Massive brushless system (including driving and rotating)driving and turning)
Hydraulic system 60A brushless controller, driving and turning system 30A brushless controller
270Kv brushless monster torque motor, shaft diameter 3.0 mm
XT60 power plug socket
Running time: 20 minutes based on 4200 mAh, 11.1 V battery
Steel machined oil pump (60mm x 60mm x 93mm)
Digging force: 15kg
Max. Lifting force: 70kg / 154 lbs
Travel speed: 360 meters per hour
Scale: 1:14
Length: 823mm
Width: 234mm
Height: 260mm
30 days limited warranty
Operating oil pressure: 2.5 MPa
Cab length inside: 120mm
Cab width: 65 mm
Cab height inside: 107 mm
Own weight: 26 kg
Included in delivery:
1x 1/14 Scale Earth Digger 360L Hydraulic Excavator (RTR )
Spare Parts:
Earth Digger 4200XL High Voltage Brushless Controller (VVV-S0009)
Earth Digger 4200XL Excavator (VVV-S0010)
Hydraulic Connector (Angled 90 Degrees) (VVV-S0015)
Hydraulic Connector (Straight Type) (VVV-S0103)(VVV-S0016)
4mm Heavy Duty Hydraulic Hoses (VVV-S0103)
Earth Digger 4200XL Excavator Aluminum Rail (V2) (VVV-S0123)
Additional parts needed:
Lipo charger (Z-E0047)
3S 11.1v Lipo battery 5000mAh and 20C or more (maximum size: 73 mm x 80 mm x 139 mm) (ex: B-50C-5000-3S1P-XT60-S)
Mobile DTE22 V22 hydraulic oil 16 ounces (VVV-S0111)
8x
AA batteries for radio
ESC support XT60 connector
Optional upgrade
Volvo decal sheet set for 1/12 Earth Digger 360L (VVV-C0267)
Notes:
The transmitter must be powered on before starting the ESC.
This unit does not have low voltage.Therefore, you will need the LiPo Battery Voltage Alarm (VVV-E0001) to protect your battery.
Although some components may be shipped assembled, it is in your best interest to inspect the products to ensure all hardware is tight. In some cases, you may want to apply thread lock to hardware that is already installed.
Use good quality hex wrenches to avoid stripping the bolt heads.
Use thread lock when installing metal screws in metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not overtighten screws or you may strip thread.