Suitable for The rims with 0-offset give your vehicle the standard width in most cases. Depending on your vehicle setup (body, suspension) and tire width, it is possible that the tires will touch your chassis. We recommend using the tire set with 1/2 offset, which will make your vehicle approximately 25mm wider overall. This tire set fits front and rear - Most 1/8 Monster Trucks with 17mm hex wheel hubs - .. Please check our 'TIRE-WHEEL CAR CHART' to see if this Louise RC tire set is...
mehr anzeigen
weniger anzeigen
Suitable for
The rims with 0-offset give your vehicle the standard width in most cases. Depending on your vehicle setup (body, suspension) and tire width, it is possible that the tires will touch your chassis. We recommend using the tire set with 1/2 offset, which will make your vehicle approximately 25mm wider overall.
This tire set fits front and rear
- Most 1/8 Monster Trucks with 17mm hex wheel hubs
- ..
Please check our 'TIRE-WHEEL CAR CHART' to see if this Louise RC tire set is suitable for your RC vehicle.
Rims
Due to the extreme stresses of driving, cornering and high jumps, the rim design and materials used are extremely important. The right flexibility and stability allow the Louise RC wheels to withstand these extreme loads.
The Louise RC wheels are made from a blend of high quality nylon granules with additional fiber reinforcement where needed. These composite materials were developed by Dupont® specifically for Louise RC.
Tire inserts
The tires are mounted with either special preformed, or cut-to-size foam inserts. The inserts are selected at an optimum density and dimension to ensure perfect cushioning and dimensional stability of the tire.
Mounted - Bonded
Due to the extreme loads, the tire must be firmly bonded to the rim. Louise RC takes the utmost care to ensure that the tires are properly bonded. For years, it has been searching for the best way to bond the tires not only well, but also cleanly. Today, Louise RC is considered one of the best in the RC industry. The tires are glued with a special rubber cyanoacrylate glue. This glue was specially developed for Louise RC to guarantee a perfect bond that can withstand all extreme forces.
The following steps are performed in production at Louise RC to achieve perfect bonding;
- The rings of the tire to be bonded are lightly sanded and degreased.
- The surface of the rim to be bonded is lightly sanded and degreased.
- The tire is glued to the rim bed with cyanoacrylate adhesive using a special dispensing device. This ensures that the same amount of adhesive is always applied.
- The glued tire is pressed on for a certain time to ensure perfect adhesion and curing.
- Each tire undergoes a rotation and pull test to ensure a perfect bond.
SPORT compound
Louise RC has years of experience in manufacturing racing tires for RC vehicles. The RC hobbyist and RC basher have very different tire requirements than the RC competition driver. From this experience, the special sport rubber compound was developed. The sport rubber compound is available in 2 hardnesses, soft or medium-soft. For the lighter 1/10 cars mainly the soft compound is used and for the more powerful and mostly heavier 1/8 models the medium-soft compound is used.
The SPORT rubber compound guarantees a tire that;
- is particularly wear resistant
- offers excellent road holding and steering precision
- offers excellent grip on the various types of surfaces.
- is compatible with the top performance of today's RC vehicles
Technical Data
- Vehicle type: 1/8 Monster Truck
- Rims driver: hexagon 17mm
- Rims Off-set: 0-Offset
- Rims color: Chrome
- Rims diameter: 3.8' - 97mm
- Rim type: Bonded
- Rim Material: Nylon Composite
- Tire Technology: Standard
- Tire Compound: Sport - Medium - Soft
- Tire Dimensions: 170x108mm
- Tire weight (1): 440g
