Element RC 40119 Enduro Trail Truck, Trailwalker RTR, black
Item number: AW40119
BUILT TO LAST. When tackling a trail, you want to know you can rely on the performance and reliability of your vehicle - the right choice is the Element RC Enduro Trail Truck!
At the heart of the Enduro chassis is Associated's revolutionary Stealth® X transmission. Unlike other transmissions, the Stealth® X transmission allows the ratio on the rear axle to be changed in three stages...
mehr anzeigen
weniger anzeigen
Element RC 40119 Enduro Trail Truck, Trailwalker RTR, black
Item number: AW40119
BUILT TO LAST. When tackling a trail, you want to know you can rely on the performance and reliability of your vehicle - the right choice is the Element RC Enduro Trail Truck!
At the heart of the Enduro chassis is Associated's revolutionary Stealth® X transmission. Unlike other transmissions, the Stealth® X transmission allows the ratio on the rear axle to be changed in three stages independently of the front axle: A standard 5.7% overdrive on the front axle (built into the RTR model), Option 1 with a 1:1 ratio between the front and rear axles (available as an accessory), and with Option 2, an 11.83% overdrive on the front axle (included).
Power is transmitted via three-piece telescopic drive shafts with a center section made of extruded aluminum, universal drive shafts on the front axle and ring gears and drive pinions made of hardened steel. With the drivetrain of the Enduro, adequate and reliable power transmission at all times is not a problem at all!
The Behind-the-Axle (BTA) steering rod mounted behind the axle so optimizes the steering angle and increases the ground clearance at the front end of the vehicle, making it much easier to move through rough terrain.
With powerful Reedy power electronics built in, the Enduro Trail Truck with Sendero body is ready for off-road adventures right out of the box. The new, high-torque 16-turn 5-slot brushed motor is designed specifically for crawlers. Combined with the Reedy Power SC480X electronic speed controller with T-connector, the result is super-smooth control response and plenty of power is always available. To keep this husky vehicle under control on the trail at all times, the model is equipped with our new XP130 2.4GHz three-channel controller and a Reedy Power 1320MG high-torque servo with metal gears.
Chassis Features:
- BTA steering and aluminum steering plates: Rear-axle steering improves steering angle, ground clearance and appearance. Bolted-on aluminum steering plates increase adjustability and stability and allow user modifications.
- Integrated Bracket for Servo Winch: Mounting the servo winch directly on the chassis ensures the strongest and most reliable connection possible on a crawler. The position next to the steering servo provides a balanced weight distribution.
- Aluminum threaded dampers: The fluid-filled aluminum threaded dampers keep the vehicle safely on track on the trail and the oil inside even in the roughest terrain.
- Reedy Power Crawler Engine: The Reedy Power 16-turn 5-slot brushed engine provides plenty of torque with smooth power delivery. This allows for slow, controlled starts and smooth propulsion over rough terrain and when negotiating obstacles
- Reedy Electronic Power Controller: The SC480X is a waterproof controller for brushed motors and is specifically designed for crawler use. It allows proportional forward and reverse, has two power supply lines, a LiPo protection circuit and is equipped with a T-connector.
- Remote Control and Servo: The new XP130 2.4GHz three-channel controller with receiver and Reedy's 1320MG waterproof power servo (metal gearbox) with 12.5 kg/cm of torque at 6 V are the perfect combination to keep the Enduro under control on the trail.
- Stealth® X transmission with adjustable overdrive: At the heart of the Enduro is our revolutionary Stealth® X transmission. On the outside, it looks like a conventional three-speed transmission, but the inside is anything but conventional. With the Stealth® X transmission, the ratio on the rear axle can be changed in three stages independently of the front axle: A standard 5.7% overdrive on the front axle (built into the RTR model), Option 1 with a 1:1 ratio between the front and rear axles (available as an accessory), and with Option 2, an 11.83% overdrive on the front axle (included).
Body Features:
AN EYE FOR DETAIL. No trail truck would be complete without a detailed and realistic body. Accordingly, the exterior of the Trailwalker Black was modeled after the styling of famous vehicles from the 1970s and 1980s.
In designing the Trailwalker body, emphasis was placed on appearance and function. The one-piece body is equipped with a roll bar, bumper,towing eyes, windshield wipers, folding exterior mirrors and grille made of injection-molded plastic and features working LED headlights.
The body of the Trailwalker Black is made of tough polycarbonate and features a new matte black Scratch 'N Weather paint finish. With this finish, which is new for RTR vehicles, you can decide whether you want to let nature take its course in rocky terrain or add weather effects to the body as you see fit.
More features:
- CMS (chassis side steering)
- Adjustable front Panhard bar
- Universal front driveshafts
- Stamped steel longitudinal spars
- Dust and waterproof receiver box
- 12mm hex wheel hubs
- Adjustable front and rear bumper brackets
- Sills with adjustable width
- Two battery boxes
- Aluminum motor plate
- Adjustable body mounts
- Optimized ball cups for smoother axle articulation
- Adjustable rear shock mount
- Telescopic drive shafts front and rear
- Extruded aluminum driveshaft body
- One-piece rear axle design
- Toothed front axle with adjustable caster
- Milled drive pinions
- Metal ring gear and intermediate gears
- Milled steel main shaft
- Robust, 5 mm thick trailing arms
- Metal ball bearings
SPECIFICATIONS:
Drive:
|
Electric
|
terrain
|
Off-Road
|
Body type:
|
Truck
|
Scale:
|
1:10 Scale
|
Level:
|
RTR*
|
Width:
|
variable
|
Length:
|
variable
|
Wheelbase:
|
313mm
|
Weight:
|
variable
|
Internal gear ratio:
|
variable
|
Drivetrain:
|
4WD
|
*This vehicle is fully assembled and ready-to-run. Some models may still require a battery, transmitter batteries and/or a suitable charger.