RC4WD Wired Winch Control Unit
This is the wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel. Specifications:Receiver -
Small Compact Size
-
Operating Voltage 6V to 11.1V
-
Requires 3 position Third Channel
-
Easy Plug and Play
-
Instruction Included
-
Length: 1.6in / 41mm
-
Width: 1.2in / 31mm
-
Height: 0.39in / 10mm
- Weight: 0.35oz / 10g
Wire -
Length: 6in / 150mm
- Wires Weight: 0.14oz / 4g
Product -
30 Day Warranty
- Manufactured by RC4WD
What's Included: -
1x Wired Control Unit
-
1x 6"" Receiver/Receiver Power Wire
- 1x 6"" Receiver/Winch Control Wire
Optional Parts: -
Warn 1/10 9.5cti 1/10 (Z-S1079)
-
For Shorter Wires 3"" Wiring Pack (Z-S1001)
- For Longer Wires 9"" Wiring Pack (Z-S0999)
Replacement parts: - Spare Empty Case for Wired Control Unit (Z-S0808)
Notes: -
You will need a radio with a third channel to operate this controller.
-
Your third channel needs to be a three position switch (on/off/on).
-
If your radio does not have a three position switch, you can purchase a wireless controller unit. (Z-S1092)
-
This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty.
-
For Warnings, Precautions, Safety and Damage Limits: Click Here
- If for any reason you cut the wires on the control box, this will void the warranty.
- Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery.
Instruction Manual: